The Importance Of Maintaining Your AC Compressor

The compressor in your air conditioner is a crucial part of the unit. It is prudent to bear this in mind, for the following reasons:

  • It is a component that the unit can’t operate without.
  • It usually is dependable, and if it fails before its’ forecast lifespan (ten to fifteen years), it is probably because of an underlying, preventable issue.
  • If failure does occur, it is costly and occasionally impossible to repair.
  • In the same way that the heart pushes blood across the body, the job of the compressor is to pump compressed refrigerant gas through the unit so that it will get rid of humidity and heat from the atmosphere.

We have just explained why maintaining your AC compressor is so important. Next, let us look at the factors that can make the compressor fail and how to stop this from happening.

Issues That Result in a Malfunctioning Compressor

Once a compressor fails, it is typically because of an underlying problem that puts pressure on the unit. This is vital to note for a couple of reasons:

-Identifying and repairing the underlying problem will stop the compressor from failing
-Replacing a malfunctioning compressor, without fixing the underlying problem, will probably result in the new AC compressor failing too.

Here are the problems that generally cause compressors to fail:

1) Filthy coils

Once grime, mineral scales and dust accumulates on the condenser’s coil, it is impossible for the air conditioner to expel sufficient heat from the unit. This forces it to work overtime, attempting to keep your living space cool. The rise in temperature and stress can result in the compressor overheating and failing.

2) Suction lines that are clogged

Once the AC refrigerant lines get damaged or clogged, you will see that the system does not cool as efficiently. If the issue isn’t repaired, then the rise in temperature and stress will result in the system overheating and malfunctioning. This is when you should consider calling an AC repair Thornton CO professional.

3) The refrigerant charge is low

If cracks or holes appear in your unit’s refrigerant lines, the refrigerant will leak from the air conditioner. Eventually, the level will drop to a point where the compressor needs to work extremely hard, to send sufficient refrigerant through the unit to keep your living space cool. Ultimately, the stress can result in the compressor malfunctioning.

4) The suction line is the wrong size

If leaks develop in the refrigerant line and it needs replacing, ensure that you hire a knowledgeable AC engineer to do this. If the new line is too small or too big for your unit, it can result in premature failure.

5) Refrigerant overload

If your air conditioner is serviced by an under-qualified engineer, who puts the wrong kind of refrigerant – or too much of it – into your system, it can damage the compressor permanently.

6) Issues with the electrics

When the electrics fail, it causes acids to accumulate, resulting in major damage to other areas and the compressor itself. If your compressor fails, ensure that the engineer checks for these acids. Should he discover them, this means that the damage has been caused by an electric burnout and that the unit is probably beyond repair.

However, electric issues are usually simple to prevent, if a knowledgeable engineer examines your unit. He can identify and fix damaged fuses and wires before they disrupt the unit and make the AC compressor fail.

7) System contaminants

The intense pressure and heat inside an air conditioning unit, as well as the areas they are often installed in New York (in crawl spaces, on roofs and outside, etc.), allows many contaminants to enter the system and damage it. Examples include dampness, air, debris, acids, dirt, soot, leaves, and sometimes pest and bird droppings.

8) Insufficient oil lubricator

The oil lubricant in an air conditioner functions like blood in the human body. If there is a shortfall, the unit can not function correctly, and all manner of issues can arise, such as AC compressor malfunction. If your unit is serviced frequently by a knowledgeable AC engineer, he will monitor the levels of lubricant and the oil pump condition to counteract this issue.

Keep Your AC Compressor in Good Condition With Frequent Maintenance

By keeping your AC compressor in a good state of repair, you will be able to enjoy a comfortable living space, with dependable, consistent cooling. This means getting your air conditioning unit checked every six months by a trusted AC service firm. Always choose a firm that employs experienced engineers, with NATE or MSCA qualifications.

How To Hire The Best Air Conditioner Repair Person

The air conditioning system in your house is an integral part of the investment in your home, and if it stops working correctly, you need to find a qualified technician to fix it. If you do not choose the right technician, you may end up paying a lot of money for work that was not done right, or you might be paying too much for a straightforward job. Here are a dozen points to keep in mind when you hire someone to fix your air conditioning system.

1. Research

It is important to start by doing some basic research. Understand the type of system you have so you are familiar with the model, brand, and the maintenance record. Check whether any rooms in your home are not at a comfortable temperature to help in assessing the problem. This will help you identify the right sort of repair.

When you understand your air conditioner unit better, you will be able to be confident about diagnosing what might be wrong with it. This will help you save money since in some cases you will not need to call in a technician if you can fix the problem yourself.

If the problem is trickier, you should definitely call in a professional. It may be more expensive to do so, but it is better to have the problem fixed properly the first time, so you do not have to call someone in again.

2. Check Around

How can you find the right sort of help? Ask your friends and neighbors if they have any recommendations. If that doesn’t work, look online for reviews of local companies. You can read about the experiences that other customers have had when they hired a particular company.

Check-in with the Better Business Bureau and find out if there have been complaints about a particular technician or company that you want to hire. It is a good idea to make a list of at least three people you would like to consider to fix your air conditioner.

3. Look For Experienced Technicians

Find out how experienced the potential technician is by looking at their website and by contacting them directly. Try to get answers to the following questions:

  • Have they been in business for a long time?
  • Do they work on a full-time basis? Or are they part-time?
  • What are their specialties?
  • Do they make an effort to upgrade their knowledge and training to deal with new technology?
  • The best choice is a full-time, professional technician who has worked on your air conditioner model in the past. It is particularly important to get someone with experience on similar systems if you have an air conditioner that is cutting edge, or that has very old technology.

4. Check On Compliance With Legal Issues

Check that your contractor has a current license. Also, check that they have liability insurance and that they are covered by worker’s compensation. Otherwise, you might be financially liable if something goes wrong. Also, verify that the contractor obeys all safety and health regulations.

5. Check References

Find out whether the technician provides good service by contacting previous customers.

Call at least three or four previous customers and ask whether the job was done properly and on budget and whether there were any problems after the work was done.

6. Ask Specific Questions

Tell the contractor any specific questions you may have about the work in question. For example, tell them if it needs to be done by a certain time, and ask what sort of equipment they use.

7. Brand Names

If you are considering a new air conditioner, ask what brands they deal with. If you already know which model you want, be sure the contractor carries that type.

8. Think Ecologically

If you are concerned about the environment, ask the company if they do anything to help conserve energy and water. A good contractor will give you information about how efficient the system is and how it impacts the environment.

9. Itemize The Costs

Have each potential contractor give you an itemized estimate in writing, including the cost of labor and materials, applicable warranties, and any rebates of taxes that may be available for some energy-efficient products.

Remember that you will incur upfront costs on the repair as well as long term costs. Hiring a cheap technician may not make up for more expensive long term costs that follow later. Find out if the company offers any special deals.

10. Discuss The Payment Schedule

Speak with the contractor regarding the payment schedule. A very large job may need a deposit upfront and the payment of incremental payments later. Check all the fine print to see what costs you must pay, and be sure you can fit any extra payments in your budget.

11. You Must Work Together

The contractor should take the time to inspect your air conditioning system and how it cools your home so that they can decide what your needs are. It is important to consider the size of your home, the layout, and the state of your ductwork, in case there are leaks in the system. If the technician does not wish to work with you in advance to evaluate your needs, this is a red flag.

12. Get It All Documented

Be sure to have a written proposal in place before you commit to hiring the technician you have chosen. A contract will spell out the costs of the job, the schedule of the project, warranty information, and any specific models to be installed. All promises made orally should be included. Never pay any money in advance or sign a contract if you don’t agree with all parts of it and understand it thoroughly.

It may seem difficult to find the right technician to fix your air conditioner, but these tips will help you to find the right person for the job. Use these tips to find the best contractor and safeguard your investment in the air conditioning of the home.

Five Easy Spring Furnace Maintenance Tips

Spring is right around the corner, and the furnace in your home has been working hard all winter season. Unfortunately, it is common for heating systems to break down before the cold season comes to an end even if homeowners have had an autumn furnace maintenance visit. Nobody wants to be left without heat, which is why our company receives so many emergency calls this time of year.

If you want to save some money on repair bills this winter, then follow these five easy home furnace maintenance tips.

1) Change Your Furnace Filter to Prevent Clogging

Furnace air filters are designed to prevent dust, debris, insects, and allergens from being pulled into your air ducts and entering your home. A clogged furnace reduces airflow, creating a strain on the heat exchanger, which may lead to system cracks. It can even cause a system meltdown that will cost a small fortune to fix. When the filter is clogged, the system is forced to work harder, increasing the amount of energy it uses and ultimately raising your heating costs. A dirty air filter can even become a fire hazard.

Our company can provide you with a list of our recommended furnace filters. We create our list of recommended filters based on their quality, durability, and efficiency. Shiptons will be happy to help you find the best furnace filter for your home heating system.

2. Inspect Your Furnace

Spring is the ideal time to inspect your home furnace. Turn off the heat as well as the power before taking a look at your heating system. Once your furnace has cooled down, it will be safe for you to begin your inspection.

First, check to see if there is any black residue or soot on or around your furnace. If you see any residue, it is a sign that you need to call a professional as soon as possible to perform a system tune-up. If there is any debris around the furnace, remove it with a hand-held vacuum or sweep it up with a broom.

Once you have finished clearing away any debris, you can switch the power back on and turn on the heat. Check the pilot light paying close attention to the color of the flame. If your furnace is functioning well, you will see a clear, blue-toned flame. If you see a yellow-colored flame, you might have a combustion issue and should call a professional to come and take a look at your system.

3. Check Your Carbon Monoxide Detector

Check your carbon monoxide detector to make sure it’s working well. If you don’t have one, you should install one in your home right away.

Carbon monoxide detectors save lives each year. Installing a detector in your home will help to keep your family safe if there is ever a build-up carbon monoxide in your home. When fuel fails to burn correctly, it can raise the carbon monoxide levels in your house, putting everyone in the household in danger. Home furnaces are the primary cause of carbon monoxide poisoning and death.

It is difficult for people to detect carbon dioxide in the home because it is odorless. Families who are suffering from carbon monoxide poisoning often think they are coming down with the flu because the symptoms are so similar. Symptoms include lightheadedness, headache, nausea, and shortness of breath. There is no way to detect carbon monoxide in the air, which is why it is crucial to have a detector in your home. There are many excellent detectors on the market. Selecting a battery-operated detector will ensure you stay safe during a power outage.

4. Prevent Potential Damage

Examine the perimeter of your house to make sure it is clear of debris. Check outside to make sure that your home is safe from anything that could cause sudden damage to your home heating system. Heavy snow or a build-up of ice on trees can lead to tree branches breaking and falling on your home. If your furnace is in the attic or located in another vulnerable area, you will need to protect it from any potential threats.

Clear the snow and ice from your roof and eavestroughs after harsh winter storms and cut off tree branches that are hanging too close to your house. Protecting your home from damage caused by wear and tear or storms will save you from having to make pricey repairs.

5. Clean Around Your Furnace

Check to see that the area around your furnace is clutter-free. If you are short on space, you may be tempted to place a few boxes of belongings in your furnace area. It is not safe to store your belongings too close to your furnace.

Any flammable products you own should be stored far from the furnace. Read the labels on containers to see which products need to be stored in a separate area of the house. If you keep the area around your furnace nice and clean, you can rest easy knowing there is nothing near your heating system that can ignite.

Always keep the walls, ceiling, and floor clean by removing any dust and debris that gathers during the winter season. There should always be a clear pathway to your furnace so you or a professional technician can take a look at the heating system right away if there is ever an emergency.

JCP Legacy Heating & Cooling

JCP has an excellent legacy of heating, ventilation, and cooling. Contact our HVAC professionals for professional heating and cooling work. We can install and repair just about every system. Our warranties are top-of-the-line compared to other companies in the area. Whenever you’re in need of great HVAC work, don’t hesitate to contact us today!